Pages

Showing posts with label Lathe. Show all posts
Showing posts with label Lathe. Show all posts

Saturday, May 31, 2014

Repairing toolpost of the lathe

I was supposed to start to do other side of spacer of springer. Lathe said No, No! Toolpost of the lathe was loose and the bolts, which keep it still were lost threads. Both! Did not have that kind of bolts, so have to invent something different.

Both side have these.


Here is one faulty one. Both were dead.


Bolt locks itself into these rails.


Here´s the start of new ones.


Too thick.


Have to take 2mm off.


Ready for threads.


One ready.



There it sits.


Works as planned.





Thursday, May 29, 2014

Spacers for front end

I started to do spacers for front end. It took me about 4 hours to make one...BUT. I had problems with tool post of lathe etc. Anyway. Point here is, that I really need practice with lathe. This was good job for learning of using it and maybe someday I will be faster & better. In any case, I am quite satisfied with the results. One more to go!

Starting point & final piece. Made from 28mm solid axle steel bar. It turned to 17mm (outside) & 12mm (inside) spacer.



The Spacer in It´s full Glory

 

I did this inside neck, so it dwells into it´s place.


There It sits!